2007-2008 Ford 4.6 3V Mustang GT Supercharger Systems

4FU218-030L



Complete System
  • 2007-2008 - Complete systems are available for manual and automatic transmission vehicles.

  • Complete, fully calibrated supercharging systems are available for the 2007-2008 4.6L 3V Mustang GT, featuring the V-2 or V-3 Si-Trim centrifugal supercharger with air-to-water charge cooler.

  • The complete high output system will boost your stock 2007-2008 Mustang GT to 462 HP and 419 lb/ft torque with 10 PSI from the V-2 or V-3 Si-Trim supercharger at the factory redline.

  • The 4.6L 3V Mustang GT systems utilize Vortech's V-2 or V-3 superchargers. Continued development in Vortech's Lab resulted in the Si-Trim Model. With its state of the art centrifugal compressor stage the Si-Trim literally blows away the competition. Industry leading 78% adiabatic efficiency [SAE J1723 standard] means less heat is being generated, drive power is reduced and more net power is produced. Less heat also means better durability. Also, Vortech's supercharger systems weigh less than half of the low-tech competing brands.

  • Superior Technology
  • Centrifugal superchargers easily make more pressure and flow than a roots type blower and are much more efficient. Read our Roots vs Centrifugal comparison to see the numbers.

  • Vortech supercharger systems are a great value. Dollar for dollar, Vortech systems deliver more horsepower than virtually any other method of upgrade. Also, driven normally, gas mileage often increases rather than decreases.

  • Available Supercharger Finishes
  • Multiple kit finishes available. For that fully integrated look, S197 Mustang systems are available in factory matching black finish. Satin and Polished units are also available.

  • Complete System Included Components and Features
  • - V-2 or V-3 Si-Trim compressor with 3.80" drive pulley (Standard Output), 3.60" (High Output)
  • - Manifold boost pressure: 8 psi (Standard Output), 10 psi (High Output) @ redline on stock engine
  • - Supplied Diablosport In-Tune handheld programmer re-flashes the ECM with a safe, custom Vortech calibration for 91-octane fuel.
  • - Fuel system upgrade includes high flow replacement fuel injectors, and 255lph "in-tank" fuel pump with harness; used in conjunction with the OEM in-tank pump to provide a dual-pump configuration.
  • Air inlet assembly includes:
    • - High-flow roto-molded ducting
    • - Silicone sleeves with stainless steel clamps
    • - 98mm MAF meter housing
    • - High flow, conical-style air filter with heat shield
    • - Diablosport MAF interface adapter for extended meter range
  • - Engine coolant pipes and hose assembly
  • - Billet aluminum supercharger mounting bracket assembly includes idlers, drive belt and all mounting hardware.
  • - Integrated air/water, dual pass charge cooler configuration allows for additional horsepower gains and features maintenance-free design (High Output Systems)
  • Oil feed and drain assemblies (V-2 models) deliver the best possible lubrication and cooling for the supercharger, even under sustained boost conditions

  • Installation
  • Installation time is rated at approximately 8-10 hours (Std. Output) or 12-14 hours (High Output).

  • INSTALLATION MANUAL

  • CARB Compliance
  • Complete systems are 50-State Emissions Legal for some 4.6L Mustangs per California Air Resources Board (CARB).
  • Not Smog Legal for Some 2005 Models
  • - These systems are not smog legal in California for 2005 model year vehicles built on or before April 30, 2005. For these particular vehicles, these systems are legal in California only for racing vehicles which may never be used, or registered or licensed for use, upon a highway (off-road use only). The manufacture, sale, offer for sale, or installation of this product may also be illegal under the federal clean air act (42 U.S.C. § 7522(A)(3)).

  • 2005-2006 Systems CARB Legal
  • - 2005 model year vehicles built after April 30th, 2005, and all 2006 model year vehicles are 50-State Emissions Legal per California Air Resources Board (CARB). CARB Executive Order # D-213-27

  • 2007 Systems No Longer Smog Legal
  • - 2007 Supercharging Systems produced after June 12, 2008 are not exempt. These systems are legal in California only for racing vehicles which may never be used, or registered or licensed for use, upon a highway (off-road use only). The manufacture, sale, offer for sale, or installation of this product may also be illegal under the federal clean air act (42 U.S.C. § 7522(A)(3)).

  • 2008-2010 Systems Not Smog Legal in California
  • - 2008-2010 systems are NOT CARB legal, and are legal in California only for racing vehicles which may never be used, or registered or licensed for use, upon a highway (off-road use only). The manufacture, sale, offer for sale, or installation of this product may also be illegal under the federal clean air act (42 U.S.C. § 7522(A)(3)).

  • Optional Parts/Accessories

    8-Rib Drive Upgrade
  • 4FU116-001 - The 8-Rib pulley upgrade is a must for any high-output tuner kit. The extra two ribs allow 33% more drive power to be transmitted to the supercharger and also reduce slip that reduces power and shortens belt life.

  • Supercharger Pulleys
  • 6-Rib pulleys: 2A036-348, 2A036-333, 2A036-312, 2A036-287
  • 8-Rib pulleys: 2A038-348, 2A038-333, 2A038-312, 2A038-295

  • - Fuel Pump Voltage Booster
  • 5A102-038 - The Maxflow® Plug-and-Play Voltage Booster Assembly increases voltage to the fuel pump for increased flow to the injectors. Included harness plugs directly into factory connector for simple, "plug-and-play" installation.

  • Water Tank Upgrade For Air-to-Water Charge Cooler
  • 8N105-120 - Larger, 2 gallon water tank reservoir for air-to-water charge cooled setups. Recommended for competition use and/or open track racing, this upgraded water tank mounts in the factory battery tray location, and increases reservoir fluid volume by over 50%.
  • Bypass Valve Upgrades
  • Maxflow Race Bypass Valves - For applications running over 10 PSI, a larger Bypass Valve is required. This Race Bypass Valve features a 1.75" oval port discharge, and can be re-circulated back to the air inlet with minor modifications.
  • Bypass Splitter - Used in conjunction with the Race Bypass Valve on applications that require re-circulation, this 1.75" - 2x 1.0" bypass splitter allow you to run the larger Race Bypass Valve with only minor modification.
  • Weld-On Flange - Weld-on flange used to mount Maxflow Race Bypass Valve to existing discharge ducting.

  • $6,629.99
    Head Unit
    Finish
    Charge Cooler
    -
    +
    $6,629.99
    Add to wishlist

    Product Summary

    No power adder company takes the 4.6L 3V powerplant to the next level of performance like Vortech. For over 30 years, we have demonstrated our product leadership with our wide range of super-efficient centrifugal superchargers. From complete, 50-State emissions-legal Standard Output and High Output Systems, to full-blown 1,200+ horsepower race setups, Vortech has you covered.

    COMPLETE SYSTEM

    462HP - The complete system will boost your stock 4.6 GT to 462HP and 419 LB/FT Torque with 10 PSI from the V-3 Si-Trim Supercharger at factory redline using CA 91 Octane fuel.

    Complete, fully calibrated supercharging systems are available for the Manual and Automatic Transmission 2007-2008 4.6L 3V Mustang GT, featuring the V-3 Si-Trim centrifugal supercharger with air-to-water charge cooler.


    The S197 Mustang GT systems utilize the ultra-efficient V-3 Si-Trim compressor. Continued development in Vortech's Lab resulted in the V-3 Si model, which reaches a peak efficiency of 78% (SAE J1723 standard). The "i" stands for improved and with its new patented oil control system and state of the art centrifugal compressor stage this V-3 Si-Trim literally blows away the competition. High efficiency equates to less heat being generated, a reduction in power required to drive the compressor, and more net power being produced as a result. Less heat also equates to superior durability. Also, Vortech's supercharger systems weigh less than half of the low-tech competing brands.

    All V-3 series superchargers have a self-contained lubrication system that makes installation fast and easy.

    Vortech supercharger systems are a great value. Dollar for dollar, Vortech systems deliver more horsepower than virtually any other method of upgrade. Also, driven normally, gas mileage often increases rather than decrease.

    Installation

    Installation time is rated at approximately 8-10 hours (Std. Output) or 12-14 hours (High Output). - INSTALLATION MANUAL

    CARB Compliance

    Complete systems are smog legal for some 4.6L Mustangs per California Air Resources Board (CARB) - See Product Details for more information, and please read the Executive Order from the California Air Resources Board website (link below).

    CARB Executive Order #D-213-27.

    Recently Viewed Products