Home All 2016-2018 Chevrolet 6.2L Camaro SS Tuner Kits
2016-2018 Chevrolet 6.2L Camaro SS Tuner Kits

2016-2018 Chevrolet 6.2L Camaro SS Tuner Kits

4GT218-110L



  • Vortech's 2016-2018 Sixth-Gen Camaro SS Supercharger Systems are available as a Tuner Kit for custom installations for modified vehicles or higher horsepower applications.

  • The 2016-2018 Camaro SS systems utilize Vortech's V-3 Si-Trim supercharger. Continued development in Vortech's Lab resulted in the V-3 Si. The "i" stands for improved and with its new patented oil control system and state of the art centrifugal compressor stage this V-3 Si-Trim literally blows away the competition. Industry leading 78% adiabatic efficiency [SAE J1723 standard] means less heat is being generated, drive power is reduced and more net power is produced. Less heat also means better durability.

    • Superior Technology
  • Centrifugal superchargers easily make more pressure and flow than a roots type blower and are much more efficient. Read our Roots vs Centrifugal comparison to see the numbers.

  • Vortech supercharger systems are a great value. Dollar for dollar, Vortech systems deliver more horsepower than virtually any other method of upgrade. Also, driven normally, gas mileage often increases rather than decreases.

    • Tuner Kits, Upgrades, More HP
  • For higher-horsepower, custom-tuned installations we recommend a tuner kit, which does not include MAP sensor or ECU programmer. This requires you or your installer to provide custom calibration and the required fuel components. The V-3 Si-Trim supercharger included with the tuner kit is capable of up to 775HP on modified vehicles. Call Vortech or your dealer for more information.

    • Supercharger Kit Finishes
  • Multiple kit finishes available. For that fully integrated look, systems are available in factory matching black finish. Satin and Polished units are also available.

    • Tuner Kit Included Components and Features
  • - V-3 Si-Trim compressor with 34 tooth drive pulley
  • - 3.60" jackshaft input pulley; 30 tooth output pulley
  • - Manifold boost pressure: 7.0-7.5 psig @ redline on stock engine
  • Air inlet assembly includes:
  • - K&N air filter
  • - Stainless steel exhaust heat shield
  • - Crankcase breather hose and connections
  • Mounting bracket assembly includes:
  • - Billet aluminum and steel supercharger plates. Rigid mount features multiple position idler location for a wide range of belt and pulley combinations.
  • - Idlers, drive belts and all hardware.
  • Discharge components include:
  • - Welded air/air charge cooler (18.7" x 15" x 3" cooler core) with integrated brackets and MAF provision.
  • - Mandrel bent aluminum charge tubes for high flow and minimal weight
  • - Stainless steel clamps and silicone coupling sleeves
  • - Plug-and-play MAF sensor extension harness
  • - Vortech Maxflow Race Bypass Valve with filter

    • Installation
  • Installation time is rated at 7-10 hours.

  • INSTALLATION MANUAL

    • CARB Compliance
  • Tuner Kits are NOT CARB legal, and are legal in California only for racing vehicles which may never be used, or registered or licensed for use, upon a highway (off-road use only). The manufacture, sale, offer for sale, or installation of this product may also be illegal under the federal clean air act (42 U.S.C. § 7522(A)(3)).

    • Optional Parts/Accessories

    10-Rib Supercharger Drive Upgrade
  • 4GT116-001 - 10-Rib Supercharger Drive Upgrade Package design allows for maximum belt traction and stability. Dedicated 10-Rib configuration replaces standard Vortech 6-rib / jackshaft supercharger drive and tensioner for customers who wish to increase their drive capability.

    • Supercharger pulleys
  • - To change pulley on supercharger, use Vortech 4GR033-xxx series supercharger pulleys.
  • - To change cog pulley on jackshaft, use Vortech 4GR032-xxx series supercharger pulleys.
  • - To change serpentine pulley on jackshaft, use Vortech 2A036-xxx series 6-Rib supercharger pulleys.
  • Vortech offers several sizes in each of these pulley types to choose from.

    • Vortech/Maxflow Race BOV
  • 8D204-111 Maxflow Billet Race BOV in Black Anodized Finish
  • 8D204-113 Maxflow Billet Race BOV in Clear Anodized Finish

    •

    $7,292.99
    Finish
    Head Unit
    Drive Type
    -
    +
    $7,292.99
    Add to wishlist

    Product Summary

    The Sixth-Gen Camaro SS is a serious contender - lighter, sleeker, and more aggressive, the new SS and its LT1 engine is just begging for some efficient Vortech Supercharged boost to be added under the hood. Chevy fanatics, Vortech has answered your call! With a street system that is quick and easy to install, and the ability to upgrade to the V-7 YSi-Trim Supercharger for applications up to and exceeding 1,200+ horsepower, Vortech Superchargers has all the horsepower and boost you have been waiting for! Do yourself a favor - take a ride in a Vortech Supercharged car and permanently change your perception of performance.

    Tuner Kit Availability

    • 2016-2018 - Tuner Kits are available for 2016-2018 Camaro SS

    Recently Viewed Products

    Loading...
    Error
     

    is added to your shopping cart.

    is added to your wish list.

    Close