VF-Engineering 2001-2004 Porsche 911/996 Carrera Supercharger Systems

The products depicted on this page are for informational purposes only, and are not for sale directly through Vortech or Paxton Superchargers. This page is dedicated to the 2001-2004 Porsche 911/996 Carrera Supercharger Systems manufactured by our 3rd Party Manufacturer - VF-Engineering. To purchase the products depicted on this page, please contact our 3rd Party Manufacturer - VF-Engineering.


The VF-Engineering designers set about designing the billet supercharger mounting bracket with CAD software creating solid models of parts to be CNC manufactured. The bracket was designed to utilize OEM bolt patterns and requires no alteration or relocation of any engine parts to be fitted. Made from 6061-T6 aircraft grade aluminum the bracket mounts to factory machined surface points on the aluminum engine block for a precision fit.

A V-3 Si model Vortech Engineering supercharger unit was chosen after consultation with Vortech engineers and matching the engine™s volumetric efficiency with supercharger compressor maps. The V-3 unit contains helical-cut gears for super quiet performance “ virtually silent with the engine compartment lid closed. The V-3 supercharger has 20+psi and 1,000+cfm capability, and is an over-engineered part for this Porsche application which is geared to produce a conservative 6psi in the engine™s intake manifold.

The fastidious design of the supercharger bracket positions the belt driven supercharger to maintain use of the OEM spring loaded belt tensioner. The serpentine belt routing was designed to maintain the correct rotation of all the accessories and maintain optimal pulley wrap for maximum friction and minimal belt slip.

The Vortech air-to-water charge cooler was integrated into the tight fit engine bay as a means of reducing charge-air induction (boost) temperatures. Lower charge temperatures promote engine safety by reducing knock and improving the quality of the combustion cycle. Charge air (boost) from the supercharger is directed through the charge cooler core before entering the throttle body. The cooler core contains isolated channels circulating with water from a separate, self-contained system, which is then cooled by its own radiator. VF-Engineering integrated a Porsche OEM front radiator and front bumper vents into the kit. Water is circulated by means of an added OEM Bosch water pump through OEM Goodyear water lines. Intake air temperatures in the manifold were measured to be approx 140 deg F even with ˜spirited™ driving at 118 deg F ambient temperatures in Arizona desert conditions mid-Summer. This dramatic drop in charge temperature helps the 996 create consistent power. For added safety the charge cooler is designed to perform continuously whilst the ignition is on.

With all major components in place, VF-Engineering set about shaping the air ducts from the filter to the throttle body. The intake pipe is specially tuned for its air flow characteristics and pressure relief system. Production pipes are manufactured from a lightweight molded high temperature polymer. The thermal insulating properties of the plastic pipes prevent heat transfer into the cooled charged air traveling inside them.

Engine management software was by written by VF with extensive testing performed on independent test cars. Multiple factors such as charge air temperatures, ignition timing, fuel trims, maps and injector performance were taken into account. The Carrera 2 and 4 test vehicles were extensively dynoed on the VF 4WD Mustang dynomometer, and monitored for wide band air fuel ratios at load levels often greater than would be experienced on the road. The results are an increase of up to 150 horsepower and 90 ft.lbs of fully usable torque.

Software is programmed into your ECU using the œHex-Flash programming cable (except for 1998-99). You can program your ECU in 15 minutes yourself through the OBD2 connector on your dashboard. This tool also allows you to read and clear ecu codes.

VF425 Supercharger

  • 425 hp / 360 ft/lbs
  • 6.0 PSI
  • Vortech V-3 Si supercharger
  • Air/Water aftercooler
  • ECU software flash

VF470 Supercharger

  • 470 hp / 360 ft/lbs
  • 6.0 PSI
  • Vortech V-3 Si supercharger
  • Air/Water aftercooler
  • ECU software flash

 

For more information on this system, and others from this Third Party Manufacturer, click the following link: VF-Engineering.