2016 Ford 5.2L Shelby GT350 Supercharger Systems

4FQ218-070L

$7,449.99
Head Unit
Finish
-
+
$7,449.99
Add to wishlist

Complete System Availability
  • 2016 - Complete systems are available for 2016 GT350, and GT350 Track Pack models

  • The GT350 system uses Vortech's V-3 SCi supercharger. Continued development in Vortech's Lab resulted in the V-3 SCi. The "i" stands for improved and with its new patented oil control system and state of the art centrifugal compressor stage this V-3 literally blows away the competition. Industry leading 75% adiabatic efficiency [SAE J1723 standard] means less heat is being generated, drive power is reduced and more net power is produced. Less heat also means better durability.

  • Centrifugal superchargers easily make more pressure and flow than a roots type blower and are much more efficient. Read our Roots vs Centrifugal comparison to see the numbers.

  • Vortech supercharger systems are a great value. Dollar for dollar, Vortech systems deliver more horsepower than virtually any other method of upgrade. Also, driven normally, gas mileage often increases rather than decreases.

  • Tuner Kits, Upgrades, More HP
  • For higher-horsepower, custom-tuned installations we recommend a tuner kit, which does not include a fuel pump, fuel injectors or ECU programmer. This requires you or your installer to provide custom calibration and the required fuel components. The V-3 SCi supercharger included with the tuner kit is capable of up to 775 HP on modified vehicles. Tuner kits are also available with the 1,000 HP V-2 Ti supercharger for high-performance racing vehicles. Call Vortech or your preferred Vortech Dealer for more information.

  • Available Supercharger Finishes
  • For that fully integrated look, 5.0 Mustang systems are available in factory matching black finish. Polished and Satin Finish units are also available.

  • Complete System Included Components and Features
  • - V-3 SCi compressor with 3.80" drive pulley
  • - Manifold boost pressure: 6.0-6.5 psig @ redline on stock engine
  • - Supplied SCT programmer re-flashes the ECM with a safe, custom Vortech calibration for 91-octane fuel.
  • - Fuel system upgrade includes high flow replacement fuel injectors (Injector Dynamics 725cc)
  • Air inlet assembly includes:
  • - OEM replacement K&N panel filter
  • - OEM 5.0L GT airbox base and lid
  • - Silicone sleeves, reducers, and stainless steel clamps
  • - PCV and breather hose provisions
  • - Replacement engine coolant pipe and hose assemblies
  • - Engine coolant reservoir replacement assembly
  • - Dual plate supercharger mounting system includes idlers, drive belt and all hardware. Mount features multiple position idler location for a wide range of belt and pulley fits.
  • Discharge components include:
  • - High flow air/air charge cooler. 24" x 13" x 3.5" cooler core.
  • - Mandrel bent 3" aluminum charge tubes for high flow and minimal weight
  • - Stainless steel clamps
  • - Silicone sleeves
  • - 98mm MAF housing configured for "blow-through" use.
  • - Integrated air-straightener upstream of the MAF housing.
  • - Vortech Maxflow Race Bypass Valve with filter

  • Installation
  • Installation time is rated at 8-10 hours.

  • INSTALLATION MANUAL

  • CARB Compliance
  • These systems are NOT CARB legal, and are legal in California only for racing vehicles which may never be used upon a highway (off-road use only). Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S Law regarding motor vehicle emissions.

  • Optional Parts/Accessories

    Supercharger pulleys
  • Use Vortech 2A036-xxx series 6-Rib supercharger pulleys. Vortech offers several sizes to choose from.

  • Fuel Pump Booster
  • 5A102-029 - The Maxflow® fuel pump booster increases voltage to the fuel pump for increased flow to the injectors. FPB2 is microprocessor controlled and is preprogrammed for the standard Coyote 5.0L engine.
  • 5A102-030 - The FPB1 Maxflow® fuel pump booster is like the 2 version but has a fixed voltage increase without programmability. Can be operated with a pressure switch.
  • Product Details

    Ford's performance division just keeps upping the ante, and the 5.2L Flat-Plane Crank Voodoo Engine in the GT350 makes a bold statement. A high-revving track car for the street, the GT350 would be just as comfortable at Laguna Seca as it is in your driveway. Vortech Engineering has taken this spectacular platform to the next level with our V-3 supercharger systems.

    713HP Complete Systems

    Complete, fully calibrated supercharger systems are available for the 2016 5.2L Mustang GT350, featuring the V-3 SCi centrifugal supercharger with air-to-air charge cooler. The complete system will boost your stock 2016 GT350 to 713 HP and 538 lb/ft torque with 6.5 PSI from the V-3 supercharger at the factory redline.

    Vortech's 2016 Mustang 5.2L GT350 Supercharger Systems are available as either a complete, fully calibrated bolt-on, or as a Tuner Kit for custom installations for modified vehicles or higher horsepower applications.

    Recently Viewed Products